A genetic linkage map in southern‐by‐spring oat identifies multiple quantitative trait loci for adaptation and rust resistance

We developed 178 recombinant inbred lines from a southern‐by‐spring oat population designated as “TxH.” These lines were genotyped to generate a high‐quality linkage map that resolved 6,902 markers into 21 linkage groups that matched closely with the latest hexaploid oat consensus map. Three major quantitative trait loci (QTLs) affecting heading date were found in locations that are consistent with known QTLs and candidate genes, and two other QTLs affecting heading date were found in novel locations. Five QTLs affecting plant height were found. Both sets of QTLs are responsible for transgressive segregation observed for these two traits. Four QTLs affecting resistance to crown rust, caused by the pathogen Puccinia coronata f. sp. avenae, were identified. Two of these QTLs are consistent with known clusters of rust resistance genes, while two may represent new locations of novel rust resistance genes. A complete set of SNP sequences suitable for generating markers for molecular selection is provided.     

筒式结构拆除的力学分析

根据力学原理，分析讨论了钢筋混凝土筒式结构定向倾倒的切口高度和切口角度．     

小麦矮秆育种中性状间关系的多元分析

以7个株高梯度系列的35个系统及5个亲本品种为材料,采用典范分析和逐步回归分析研究了株高及其构成因子与产量因子、产量生理性状间的关系。结果表明:①株高因子通过产量生理性状影响产量因子,一定的生物学产量是获得高产的基础。②矮秆品种的高化对提高产量、千粒重和收获指数有利,对蛋白质含量的影响不明显;高秆品种矮化能显著提高收获指数,对籽粒的蛋白质含量影响不大。③在主要性状符合育种目标的前提下,选择倒二节间较长、第一和第二叶间距略长、穗颈和穗部较长的类型可能对提高产量有利。     

四川的云南松地径胸径相关关系及其应用研究

本文报道了四川的云南松树干在部三个不同部位直径(地表直径d0．00、0.05m高处直径d0.05、0.1Om高处直径d0.10)与胸径(d1．3)的相关关系，利用其编制了四川云南松地径一元材积表，并对其在四川云南松林区进行盗伐木、滥砍乱伐木材积估计和监测森林资源消耗量等方面的应用进行了探讨。四川云南松地径与胸径最佳关系模型为二次抛物线回归方程，相关系数r=0，999217～0．999380，剩余平方和Q=179．3391～226．4480，且d0.10与d1．3相关关系最为紧密。     

四个紫花苜蓿品种种子萌发期耐盐性研究

在实验室内模拟的盐分条件下,用不同浓度的Na Cl盐溶液对4个紫花苜蓿品种(中苜1号、中苜3号、中草3号和陇东苜蓿)种子萌发期进行盐胁迫处理。结果表明:低浓度(0.2%和0.4%)的盐溶液对苜蓿的发芽率和幼苗苗高抑制作用不显著,对幼根具有一定的刺激作用。0.8%和1.0%的Na Cl溶液处理下发芽率、0.6%的Na Cl溶液处理下的幼苗苗高和幼根生长量可以作为苜蓿种子萌发期耐盐性鉴定指标。对四个紫花苜蓿品种的发芽率、幼苗苗高、幼根生长量、耐盐半致死浓度四个指标进行综合分析,结果表明:中苜1号耐盐性最强,其次是中苜3号和中草3号,陇东苜蓿最弱。     

小兴安岭天然林不同树种的树高曲线模型

选用10种树高曲线模型作为候选模型,以决定系数(R~2)、残差平方和(S_(se))和均方差(M_(se))作为模型优劣的评价指标,对小兴安岭天然林中的云杉(Picea asperata)、红松(Pinus koraiensis)、水曲柳(Fraxinus mandschurica)、椴树(Tilia tuan)4种树种的树高曲线模型进行优选。结果表明:云杉、红松和椴树的最优模型均为Logistic模型,水曲柳的最优模型为抛物线模型;云杉和红松两种针叶树种,最优模型的优势不明显,水曲柳和椴树两种阔叶树种最优模型的优势较明显;比较R~2的大小,得出较适合小兴安岭云杉和红松两种针叶树种的树高曲线模型(R~20.8),对小兴安岭阔叶树种的适用程度不具有普遍性,对椴树的适用性好(R~2最大达0.94),对水曲柳的适用性较差(R~20.8)。对水曲柳的树高进行分段研究得出:水曲柳在树高低于9 m时,树高曲线模型较适宜(R~20.8),其中抛物线模型为最优模型;树高较高时,没有适用的树高曲线模型。     

An investigation into the grazing efficiency of perennial ryegrass varieties

The objective of this study was to compare the grazing efficiency of 30 perennial ryegrass varieties, differing in ploidy and heading date. Plots were grazed by lactating dairy cows and managed under a rotational grazing system with 19 grazing events occurring over two years. Pre-grazing and post-grazing compressed sward heights were measured with a rising plate meter. A mixed model was used to predict the post-grazing sward height of each variety based on year, grazing event, block and pre-grazing sward height. Residual grazed height (RGH) was derived as the difference between the actual and predicted post-grazing sward height and was used as the measure of grazing efficiency. Negative RGH values indicated that the actual herbage removed was greater than that predicted and so indicated a superior grazing efficiency. Varieties differed in their level of grazing efficiency (p < .001), with RGH values ranging from −0.38 to +0.34 cm. Tetraploid varieties exhibited significantly greater grazing efficiency performance than diploids (p < .001), with average RGH values of −0.13 and +0.13 cm respectively. A significant difference in grazing efficiency was found among recommended perennial ryegrass varieties that are not being recorded by mechanically harvested simulated grazing protocols. A variety reappraisal that included grazing efficiency could identify varieties capable of improving on-farm livestock productivity from grass.     

离地高度可调的减振式履带驱动机构设计

履带式农田作业车由于其优异的通过性与稳定的行驶性能,被广泛使用于南方丘陵地区。针对传统履带底盘采用刚性悬架,无法调节离地高度,行驶时乘坐舒适性较差的问题,设计了一种离地高度可调的减振式履带驱动机构。该机构采用分离式设计,将整个驱动机构分为上层承载架与下层行驶架,通过在上、下层之间设置液压缸与弹性元件,达到在一定区间内调节车辆离地高度与减少车身振动的目的。通过对关键部件进行重点设计,并对其工作过程进行简要分析,该机构在理论上能达到设计要求。     

定苗时间对峦大杉1年生苗木生长的影响

探究定苗时间对峦大杉苗期生长动态与生长节律影响,优化定苗时间,为育苗提供理论与技术支持。以当年生峦大杉幼苗为试验材料,开展不同定苗时间试验,采用定株观测并应用Logistic方程拟合生长动态的方法,分析定苗时间对苗木生长动态和生长节律的影响效应。研究结果表明,定苗时间影响苗高地径生长效应随处理时间推移而显现,是个动态过程。Logistic方程能够很好地拟合峦大杉苗木生长。定苗时间显著影响苗高、地径线性生长速率、最大线性生长速率和线性生长量,但对苗高地径线性生长始期、终期、线性生长持续期无显著性影响;苗高生长初期定苗较其他处理显著提高苗高和地径的线性生长量线性生长速率、最大线性生长速率,建议增加速生期的养分和水分供给以提高苗木质量。峦大杉合理定苗时间是苗高生长初期（6月30日）。     

Soybean plant height QTL mapping and meta‐analysis for mining candidate genes

Plant height is closely related to seed yield of soybean. The goal of this study was to identify important loci affecting soybean plant height using meta‐analysis based on a reference physical map. Plant height related to QTLs was mapped across eight years with a RIL population by WinQTLCart v2.5. 182 QTLs related to plant height of soybean from database and our research were collected, and each QTL was projected onto the soybean physical map by software BioMercator v2.1. The confidence interval of meta‐QTL ranged from 0.09 to 5.07 Mb, and the mean phenotypic variance ranged from 4.9% to 73.0%. Furthermore, 4,259 candidate genes were located in these consensus QTLs, and 40 of them were involved in the plant growth and stem elongation and annotated as plant hormone signal transduction (pathway ID ko04075) in KEGG pathway. These results would lay a foundation for fine mapping of QTLs/genes related to plant height and marker‐assisted selection for breeding in soybean.